Users Guide

Table 4. iDRAC Profile Settings
S.No Target Server Profile Settings What is Applicable
1. Rack and Tower systems All four types of attributes
are configured.
All attributes in the
Integrated Dell Remote
Access Controller profile.
2. Blade systems All four types of attributes
are configured.
All attributes in
Common IP settings.
All attributes in IPv4
settings.
Only vLAN ID and vLAN
priority attributes from
Advanced LAN settings.
3. Rack, Tower, or Blade
system with Static IP
address
IPv4 Configuration
attributes only.
IPv4 address source is
updated.
4. Rack, Tower, or Blade
systems
LAN Settings attributes
only.
Applied only to Rack and
Tower systems and not to
Blade systems.
5. Rack, Tower, or Blade
systems
Advanced LAN Settings
attributes only.
All Advanced LAN Settings
attributes are applied to
Rack and Tower systems.
Only vLAN ID and vLAN
priority attributes are
applied to Blade systems.
6. Rack, Tower, or Blade
systems
Common IP Configuration
attributes only.
Common IP Configuration
attributes.
7. Rack, Tower, or Blade
systems without iDRAC6
enterprise card
LAN Settings with NIC
mode set to Dedicated.
Nothing is applied as this
attribute needs the iDRAC6
enterprise card.
8. Rack, Tower, or Blade
systems
LAN Settings with NIC
mode set to Shared.
Attribute is applied only to
Rack and Tower systems
and only if the host
operating system is
configured for NIC teaming.
9. Rack, Tower, or Blade
systems
IPv4 Configuration where IP
range specified is less than
the number of systems.
Nothing is applied and an
error is displayed in the OS
deployment workflow.
10. Rack, Tower, or Blade
systems booted to Unified
Server Configurator
All four types of attributes
are configured.
All attributes applicable to
the systems.
3. Click Next to select an advertisement.
NOTE: If there is an error while applying an Integrated Dell Remote Access Controller profile, the operating
system deployment process stops.
Comparing and Updating Firmware Inventory for Systems in a
Collection
This feature enables you to retrieve, compare, and update firmware inventory on the Dell systems with Lifecycle
Controllers in a collection.
37