Owner's Manual

Dell - Internal Use - Confidential
correctly. Upgrade to Lifecycle Controller firmware version 1.5.1.
Affected version: DLCI 2.2 with 11G Lifecycle Controller 1.5
* While applying minimum bandwidth on Qlogic Partitionable NIC cards, if the
summation of minimum bandwidth on all partitions of a port reaches more
than 100 the apply operation will fail. Ensure that you apply 0 on all
partitions as minimum bandwidth before applying any other values.
* BIOS Configuration will fail when it is done for the second time if 11G server
has either 1.9 (monolithic) or 3.4 (modular) version of iDRAC firmware. Ensure
you upgrade the iDRAC firmware level to 1.92 (monolithic) or 3.42 (modular).
* It is recommended that you delete and re import the server from Configuration
Manager before installing a Non Windows OS on the server which is already
having Windows OS installed and Configuration Manager Client configured.
* When you deploy the Windows Server operating systems on 11G Dell PowerEdge servers; If drivers
were applied from Lifecycle Controller, then few device drivers may not work or be available. As a
workaround, in the server where you deployed the operating system, manually update drivers or in Task
Sequence, as a fallback for option
Apply Drivers from LC use option Apply Driver Package.
Installation Prerequisites
Software Requirements
* System Center 2012 Configuration Manager or System Center Configuration
Manager 2007
* Dell Server Deployment Pack 2.1 (DSDP 2.1)
Installation Instructions