Users Guide

You can also use the GUI to configure the security. For more information, see Using the Graphical User Interface.

Validating a Dell Factory-Issued Client Certificate on the Integrated Dell Remote Access

Controller for Auto-Discovery

This security option requires that a system being discovered by the provisioning website during the discovery and

handshake process has a valid factory-issued client certificate which is deployed to the Integrated Dell Remote Access

Controller. This feature is enabled by default. To disable the feature, run the following command:

C:\Program Files (x86)\Dell\DPS\ProvisionWS\bin\import.exe -CheckCertificate false

NOTE: By default, the CheckCertificate value is set to true. Ensure that you set the CheckCertificate value to false

if you are not using unique certificates.

Pre-Authorizing Systems for Auto-Discovery

This security option checks the service tag of the system being discovered against a list of authorized service tags you

have imported. To import the authorized service tags, create a file containing a comma-separated list of service tags,

and import the file by running the following command:

C:\Program Files (x86)\Dell\DPS\ProvisionWS\bin\import.exe -add [file_with_comma_delimited_service_tags].

Running the command creates a record for each service tag in the repository file Program Files]\Dell\DPS\Bin

\Repository.xml.

This feature is disabled by default. To enable this authorization check, run the following command:

C:\Program Files (x86)\Dell\DPS\ProvisionWS\bin\import.exe –CheckAuthorization true.

Changing the Administrative Credentials Used by Dell Lifecycle Controller Integration for

Configuration Manager

Use the following commands to change the administrative credentials for Configuration Manager used by Dell Lifecycle

Controller Integration:

To set the user name:

C:\Program Files (x86)\Dell\DPS\ProvisionWS\bin\import.exe –CIuserID [New

Console Integration Admin User ID]

To set the password:

C:\Program Files (x86)\Dell\DPS\ProvisionWS\bin\import.exe -CIpassword [New

Console Integration Admin Password]

NOTE: The commands are case sensitive.

Using the Graphical User Interface

You can also use the Graphical User Interface (GUI) to change the security configurations.

Use the following command to open the GUI screen:

C:\Program Files (x86)\Dell\DPS\ProvisionWS\bin\import.exe -DisplayUI

NOTE: The DisplayUI term is case sensitive.