Owner's Manual

Using The System Viewer Utility 95
You can configure the default number of log files you want to view. This is
a global setting that defines the maximum number of logs to be displayed
on the grid. To configure the default number of log files:
a Open the DLCSystemview.exe.config or the
DLCConfigUtility.exe.config from the folder where you have
installed DLCI for Configuration Manager.
b Search for the MAX_LC_LOGS_TO_DISPLAY parameter and
specify a number.
When you choose
All in the Lifecycle Controller Logs Viewer, the number
of logs you have specified are displayed.
3 Click View after specifying the number of records you want to view.
NOTE: This step is applicable only when you manually enter the number of
records without selecting from the drop-down list. If you select the number
from the drop-down list, the records are displayed automatically. You cannot
specify any value lesser than the number of records that can be viewed at a
time. If you want to view reduced number of records, then you must sort and
filter the records per system or close the System Viewer utility (Config Utility in
the case of a collection) and reopen the same.
When loading the logs, if there are more records to be loaded, the
following message is displayed:
More records to be displayed .
When all the records are loaded, the following message is displayed:
There are no more records to be displayed .
4 (Optional) To fetch fresh Lifecycle Controller logs from the system, click
Refresh .
5 (Optional) When you are loading a large number of logs, you can click
Pause to temporarily stop the loading of log files. During this phase, you
can change the number of records you want to view by selecting the
number from the drop-down list.
6 (Optional) Click Resume to resume the loading of logs.
7 (Optional) Click Export to CSV to save the file in CSV format at a
specific location. This option exports only the log files that are displayed
on the grid. If you have filtered the data on the grid, this option exports
only the filtered data.
DLCI_UserGuide.book Page 95 Friday, October 12, 2012 7:16 PM