Owner's Manual

Using The System Viewer Utility 83
Viewing And Configuring RAID
This feature enables you to view and configure RAID on the server.
1
On the System Viewer utility, click on RAID Configuration . The RAID
Configuration
screen displays the RAID information of your system, such
as number of virtual disks, controller IDs, RAID levels, and physical disks.
2 Click Create RAID profile to create a new RAID configuration profile
using
Array Builder . For more information on using the Array Builder, see
Using The Array Builder.
Configuring iDRAC Profiles For A System
This features enables you to define iDRAC configuration and save it and
apply the profile to a collection as part of the workflow while deploying an
operating system.
You can create or edit iDRAC profiles for a system using the System Viewer
utility.
Creating An iDRAC Profile
1 On the System Viewer utility, click iDRAC Configuration. The iDRAC
Configuration options are displayed.
2 Select Create a New Profile and click Next .
The iDRAC configuration of the system is retrieved and displayed.
3 Click the Network Configuration tab.
4 Select the attributes you want to configure from the drop-down list. You
can configure the following attributes:
– LAN Settings
– Advanced LAN Settings
– Common IP Configuration
– IPv4 Configuration
NOTE: For more information on the various parameters that you can set for
the above attributes, see the
Dell Lifecycle Controller Unified Server
Configurator/Unified Server Configurator-Lifecycle Controller Enabled Version
1.5 User’s Guide
available at support.dell.com/manuals.
DLCI_UserGuide.book Page 83 Friday, October 12, 2012 7:16 PM