Owner's Manual

Using The System Viewer Utility 81
2 Select the profile that you want to edit and click Next .
3 The BIOS Attributes tab displays the BIOS attributes of the selected
profile. Select the attributes that you want to edit, and click Edit
Attribute.
4
The Custom Attribute Editor displays all the attributes in the drop-down
list against the
Attribute Name field. Select the attribute that you want to
edit, and make the necessary changes.
5 Click OK to save the changes and exit the Custom Attribute Editor .
NOTE: Click Reset to reset any changes made.
Adding A New Attribute
1 In the BIOS Configuration screen, select Create a New Profile or Edit an
Existing Profile
, and click Browse to browse for the profile.
2 In the BIOS Attributes tab, click Add .
3 In Custom Attribute Editor , enter the attribute name in the Attribute
Name
field. A value in this field is mandatory.
4 Select the type of attribute that you want to add from the Attribute Type
drop-down list. Attributes are of three types:
•
Enum Attribute — Displays a combo box with multiple values. At
least one value should be selected.
•
Text Attribute — Displays a field with text values. This field can be
empty.
•
Numeric Attribute — Displays a field with integer values. This field
cannot be empty.
DLCI_UserGuide.book Page 81 Friday, October 12, 2012 7:16 PM