Owner's Manual

Using The Configuration Utility 61
3 Click Next to select an advertisement.
NOTE: If there is an error while applying an iDRAC profile, the operating system
deployment process stops.
Comparing And Updating Firmware Inventory For
Systems In A Collection
This feature enables you to retrieve, compare, and update firmware inventory
on the Dell systems with Lifecycle Controllers in a collection.
NOTE: To compare and update firmware remotely, you must ensure that
the Dell systems have iDRAC firmware version 1.5 or higher. For more
information on upgrading to firmware version 1.5, see the
Integrated Dell Remote
Access Controller 6 (iDRAC) Version 1.5 User Guide
available at
support.dell.com/manuals.
6. Rack, Tower, or Blade
systems
Common IP
Configuration attributes
only.
Common IP
Configuration attributes
7. Rack, Tower, or Blade
systems without
iDRAC enterprise card
LAN Settings with NIC
mode set to Dedicated.
Nothing is applied as this
attribute needs the
iDRAC enterprise card.
8. Rack, Tower, or Blade
systems
LAN Settings with NIC
mode set to Shared.
Attribute is applied only
to Rack and Tower
systems and only if the
host operating system is
configured for NIC
teaming.
9. Rack, Tower, or Blade
systems
IPv4 Configuration where
IP range specified is less
than the number of
systems.
Nothing is applied and an
error is displayed in the
operating system
deployment workflow.
10. Rack, Tower, or Blade
systems booted to
Unified Server
Configurator
All four types of attributes
are configured.
All attributes applicable
to the systems.
Table 4-2. iDRAC Profile Settings
(continued)
S.No Target Server Profile Settings What is Applicable
DLCI_UserGuide.book Page 61 Friday, October 12, 2012 7:16 PM