Owner's Manual

Using The Configuration Utility 59
4 Click Next to apply an iDRAC profile .
NOTE: If there is an error while applying a NIC or CNA profile, the operating system
deployment process continues to the next step. While applying an attribute using
Config Utility, it does not check the dependent attributes value.
2. Dual Port NIC
(partition disabled)
Dual Port NIC Dual Port NIC
Port level settings are
applied when the system
reboots.
3. Dual Port NIC
(partition disabled)
Dual Port Quad Partition
NIC
Dual Port Quad Partition
NIC
Partition is enabled when
the system reboots.
4. Dual Port Quad
Partition NIC
Dual Port NIC
Dual Port Quad Partition
NIC
Dual Port Quad Partition
5. Dual Port Quad
Partition NIC
Dual Port NIC Nothing is applied as
there is no match
between the target server
setting and profile
setting.
6. Dual Port Quad
Partition NIC
Dual Port Quad Partition
NIC
Dual Port Quad Partition
Table 4-1. Broadcom Profile Settings
(continued)
S.No Target Server Setting Profile Settings What Is Applied
DLCI_UserGuide.book Page 59 Friday, October 12, 2012 7:16 PM