Owner's Manual

Using Dell Lifecycle Controller Integration 43
Controllers
Controller elements contain variable condition elements. Some controller
configuration types:
• The embedded controller
• A controller in slot "X"
• Any controller with "X" disks
• Any controller with "X" disks or more
• All remaining controllers
Adding A Controller
1 Select a controller from the list, or select an embedded controller. The
Controllers drop-down menu is enabled.
2 Click Controllers  New Controller .
The
Controller Configuration window is displayed.
3 Under Controller Selection Criteria , select from the following options:
•
Select the controller located in slot — Enter the slot number of the
controller.
•
Select any controller with < exactly, atleast > < number of > disks
attached
— Set a rule to select any controller which matches exactly,
or at least the number of disks you have selected.
• Select all remaining controllers in the system regardless of
configuration
4 Under Variable Matching Criteria , you can set a rule to apply this
configuration only if it matches certain criteria that you select. Select
Apply this configuration only when the variable to enable the rule setting
options.
5 Click OK .
Editing A Controller
Select the controller and click Controllers  Edit Controller. The Controller
Configuration window is displayed where you can make changes to the
controller.
DLCI_UserGuide.book Page 43 Friday, October 12, 2012 7:16 PM