Owner's Manual

Using Dell Lifecycle Controller Integration 39
You can also use the GUI to configure the security. For more information, see
Using The Graphical User Interface .
Validating A Dell Factory-Issued Client Certificate On The iDRAC For Auto-
Discovery
This security option requires that a system being discovered by the
provisioning website during the discovery and handshake process has a valid
factory-issued client certificate which is deployed to the iDRAC. This feature
is enabled by default. To disable the feature, run the following command:
C:\Program Files
(x86)\Dell\DPS\ProvisionWS\bin\import.exe
–CheckCertificate false
NOTE: By default, the CheckCertificate value is set to true. Ensure that you set the
CheckCertificate value to false if you are not using unique certificates.
Pre-Authorizing Systems For Auto-Discovery
This security option checks the service tag of the system being discovered
against a list of authorized service tags you have imported. To import the
authorized service tags, create a file containing a comma-separated list of
service tags, and import the file by running the following command:
C:\Program Files
(x86)\Dell\DPS\ProvisionWS\bin\import.exe -add
[file_with_comma_delimited_service_tags].
Running the command creates a record for each service tag in the repository
file [Program Files]\Dell\DPS\Repository.xml.
This feature is enabled by default. To disable this authorization check, run
the following command:
C:\Program Files
(x86)\Dell\DPS\ProvisionWS\bin\import.exe
–CheckAuthorization false.
DLCI_UserGuide.book Page 39 Friday, October 12, 2012 7:16 PM