Owner's Manual

110 Troubleshooting
Resolution : On a rack and tower server, ensure that it has iDRAC version
1.8 firmware or newer. On a blade server, ensure that it has iDRAC
version 3.3 or newer.
•
Issue : When you are deploying an operating system using the Launch
Config Utility
, the advertisements of the task sequence are not displayed
on the screen.
Resolution : Ensure that you advertise against the exact collection you plan
to deploy to, as advertisements against a parent collection does not apply
to the child collection(s).
•
Issue : While deploying Microsoft Windows 2008 R2 from ConfigMgr SP1
R2 with Windows Automated Installation Kit (Windows AIK) 1.1, the
following error message is displayed:
Operation failed with 0X80070002. The system
cannot find the file specified.
Resolution : This issue occurs if you use a Windows PE 2.X based boot
image created with Windows AIK 1.X for deploying Microsoft Windows
2008 R2. Ensure that the task sequence deploying Microsoft Windows
2008 R2 uses a Windows PE 3.0 or later based boot image created with
Windows AIK 2.X or later. For more information, see the Microsoft
Technet site at
technet.microsoft.com .
•
Issue : If the target system has an older version of BIOS that does not
support a particular method, the following error message is displayed in
the DLCTaskManager.log file:
Installed BIOS version does not support this
method
.
Resolution : Update the BIOS to the latest supported version.
DLCI_UserGuide.book Page 110 Friday, October 12, 2012 7:16 PM