Owner's Manual

Troubleshooting 107
8 Create an SSL certificate configuration that applies the imported
Certificate Trust List . At the command prompt, paste the following
command:
netsh http add sslcert ipport=0.0.0.0:4433 appid=
{6cb73250-820b-11de-8a39-0800200c9a66}
certstorename=MY certhash=
fbcc14993919d2cdd64cfed68579112c91c05027
sslctlstorename=CA sslctlidentifier=
"ProvisioningCTL"
9
To enforce SSL and client certificates for the website:
a Add a SSL binding to set the port to 4433 and to use the
DellProvisioningServer certificate. A warning displays that the
certificate is assigned to another program.
b Click OK .
c Remove the HTTP binding for port 4431.
d Select the required SSL option.
e Select the required client certificates option.
f Click Apply .
Dell Auto-Discovery Network Setup Specification
For information on auto-discovery error messages, descriptions, and response
actions, see the Dell Auto-Discovery Network Setup Specification document at
delltechcenter.com.
DLCI_UserGuide.book Page 107 Friday, October 12, 2012 7:16 PM