Owner's Manual

Issue 6
Description -
To perform firmware updates from ftp.dell.com for PowerVault NX300 systems ensure that 1G
Lifecycle Controller version is 1.5.1 or higher.
Issue 7
Description - While performing Import Dell Servers if the Dell Connections License Manager has Unlimited
number of licenses then soon after Authentication to iDRACs the next page on Import Dell Server Wizard
shows all non licensed servers as Licensed. But completing the Import Process does not acquire more than
one license for any server.
Resolution
Versions Affected
Issue 8
Description -
While applying minimum bandwidth on Qlogic Partitionable NIC cards, if the summation of
minimum bandwidth on all partitions of a port reaches more than 100 the apply operation will fail. Ensure
that you apply 0 on all partitions as minimum bandwidth before applying any other values.
Resolution
Versions Affected
Issue 9
Description -
BIOS Configuration will fail when it is done for the second time if 11G server has either 1.9
(monolithic) or 3.4 (modular) version of iDRAC firmware. Ensure you upgrade the iDRAC firmware level to
1.92(monolithic) or 3.42 (modular).
Issue 10
Description - In DLCI for Configuration Manager version 1.3 or version 2.0, if Platform Restore is run on a
collection where servers are identified by hostname (instead of service tag) and the server profiles are
exported to a share, then to import the server profiles after upgrading to DLCI 2.0.1.
1. Open the share location where profiles are exported.
2. For the filename formats <prefix>-<hostname>. Rename the filename format to <prefix>-<servicetag>.
3. Do step 2 to all exported files.
Issue 11
Description - In DLCI for Configuration Manager 1.3 or version 2.0, in the System Viewer utility, the cached
network paths in the Export Lifecycle Controller Logs, Firmware Update, and Platform Restore workflows
saved after hostname is changed are not retained after upgrading to DLCI 2.0.1.