Owner's Manual

• To deploy Microsoft Windows Server 2003 operating systems using the Apply Drivers from
LC option, ensure that there is a fallback step to install drivers from Configuration Manager,
else the deployment fails.
• During Discovery and Handshake, the DPS.log displays an empty "Site code:" followed by a
cryptography exception.
• During Discovery and Handshake, the DPS.log displays numerous messages
"createDellCollecions() Either Connection Mgr param is NULL or Collection not yet created."
• The System Viewer utility does not display the latest RAID configuration. To view the latest
configuration re-launch the System Viewer utility.
• The modular systems cannot use the hostname in the path to the Common Internet File
System (CIFS) share but monolithic systems can use the hostname. Use the IP address
instead of hostname.
• After deploying Non-Windows Operating System using DLCI the service tag of system name
is displayed as Hostname in configuration manager console.
Open Issues and Resolutions
Issue 1
Description -
During installation of DLCI, the Configuration Manager credentials specified are not validated.
Installation will succeed and an error in import.log will indicate the same. Use DPS configure utility
(import.exe) to specify the correct credentials before proceeding with discovery of servers.
Issue 2
Description -
The Advertise option does not appear in an existing task sequence after uninstalling and
reinstalling DLCI for Configuration Manager. To advertise the task sequence, edit the task sequence and
correct if there are any errors.
Fixed Issues/def
Issue 3
Description -
If Active Directory(AD) authentication is used for communicating with iDRAC on modular
servers, ensure the iDRAC version is upgraded to 3.32.
Versions Affected - DLCI 2.0.1 with 11G iDRAC 3.30 (or earlier).
Issue 4
Description -
If the host system has Lifecycle Controller version 1.5, ensure that while configuring username
as part of iDRAC configuration, the username length is less than 16.
Versions Affected - DLCI 2.0.1 with 11G Lifecycle Controller 1.5
Issue 5
Description -
If the host system is 11G server and has Lifecycle Controller version 1.5, RAID configuration of
H200 controller using DLCI 2.0.1 does not work correctly.
Resolution - Upgrade to Lifecycle Controller firmware version 1.5.1.
Versions Affected - DLCI 2.0.1 with 11G Lifecycle Controller 1.5