Setup Guide

SC2016 VMM console crash while importing DLCI for
SCVMM console addin
The SCVMM console crashes while importing the DLCI for SCVMM addin, if the user has insufficient access to the folder where
the console addin is installed.
As a workaround, install the Update Rollup 1 for SC2016 VMM, and then import the DLCI for SCVMM console addin.
Failure to launch DLCI for SCVMM admin portal and
DLCI for SCVMM console addin on Windows 2012 OS
Launching the admin portal on Internet Explorer (IE) version 10 and launching the console from SCVMM on a Windows Server
2012 OS fails when TLS 1.2 is enabled.
As a workaround, install the latest IE security update and then launch the admin portal on Internet Explorer (IE) version 10 and
console from SCVMM. For more information, see dell.com/support/article/us/en/19/SLN302365.
IP address not assigned to the appliance
After creating and starting the appliance, the IP address is not assigned or displayed on the black console.
As a workaround, check if the virtual switch is mapped to a physical switch, configured correctly and then connect to the
appliance.
No required permission to access SCVMM
When the SCVMM account used to open the SCVMM console does not meet the prerequisites, you get the following error:
“You should be an Administrator/Delegated Administrator to launch the Add-In”.
For information on the privileges required for SCVMM account and IG account, see Dell Lifecycle Controller Integration for
System Center Virtual Machine Manager Installation Guide.
SCVMM error 21119 while adding servers to active
directory
While adding servers to Active Directory, SCVMM error 21119 is displayed. Error 21119: The physical computer
with <SMBIOS GUID> did not join Active Directory in time. The comptuer was expected to join
Active Directory using the computer name <host.domain>.
As a workaround, do the following:
1. Wait for some time to see if the server is added to the Active Directory.
2. If the server is not added to the Active Directory, then manually add the servers to the Active Directory.
3. Add the server in to SCVMM.
4. Once the server is added in to SCVMM, rediscover the server in the DLCI Console.
The server is listed under the Host tab.
Troubleshooting
21