Users Guide

• If you selected Discover Using an IP Range, then provide the IP address range you want to

include and if you must exclude an IP address range, select Enable Exclude Range and provide

the range that you want to exclude.

6. In Job Options, to track this job, assign a job name and to view the job list, select Go to the Job List

after completing.

7. Click Finish.

Viewing Device Inventory

The Device Inventory page lists the unassigned servers and host servers. Servers discovered by appliance

are known as unassigned servers and these servers are available for hypervisor deployment. Host servers

are servers inventoried in the SC2012 VMM.

To view servers:

In DLCI Console, click Device Inventory.

NOTE:

If 11th and 12th generation of PowerEdge servers are discovered and inventoried in appliance

version 1.0 and you are upgrading to appliance version 1.0.1, then in the Device Inventory page,

the already discovered servers appear as non-compliant.

To make the servers compliant: Rediscover the servers.

Launching iDRAC Console

To launch iDRAC Console:

In Device Inventory, under Unassigned Servers or Hosts, for a system, click the iDRAC IP.