Owner's Manual

76 Using the System Viewer Utility
– Advanced LAN Settings
– Common IP Configuration
– IPv4 Configuration
NOTE: For more information on the various parameters that you can set for
the above attributes, see the Dell Lifecycle Controller Unified Server
Configurator/Unified Server Configurator-Lifecycle Controller Enabled Version
1.5 User’s Guide
available at support.dell.com/manuals.
5 Click the Users tab. The grid retrieves the list of Integrated Dell Remote
Access Controller users from the system and displays them.
6 You can add a user account or edit an existing user account. Integrated
Dell Remote Access Controller has 16 users out of which you can configure
15.
– To add a new user account, select a user account that is not
configured.
– To edit a user account, select the account on the grid and click Edit,
or double-click the user account.
The Edit User screen is displayed.
NOTE: You cannot edit the user account that Dell Lifecycle Controller
Integration uses to access the Integrated Dell Remote Access Controller of
the system.
7 Specify the following details:
– General Details — that includes the user name and password. You
must specify the password when you create or edit a user account.
– IPMI LAN user Privilege granted — select the type of user from the
drop-down list to grant the IPMI LAN user privilege.
– Other Privilege — Select the Integrated Dell Remote Access
Controller group from the drop-down list and select the privileges that
you want to assign to that group.
For more information on the privileges, see the Dell Lifecycle
Controller Unified Server Configurator/Unified Server Configurator-
Lifecycle Controller Enabled Version 1.5 User’s Guide
available at
support.dell.com/manuals .
8 Click OK to save the user account configuration and revert back to the
Users tab.
DLCI_UserGuide.book Page 76 Tuesday, November 22, 2011 5:00 PM