Owner's Manual

Using the System Viewer Utility 75
Viewing and Configuring RAID
This feature enables you to view and configure RAID on the server.
To configure RAID:
1 On the System Viewer Utility, click on RAID Configuration . The RAID
Configuration screen displays the RAID information of your system, such
as number of virtual disks, their controller IDs, RAID levels, and physical
disks.
2 Click Create RAID Profile to create a new RAID configuration profile
using
Array Builder . For more information on using the Array Builder, see
Using the Array Builder.
Configuring Integrated Dell Remote Access
Controller Profiles for a System
This features enables you to define Integrated Dell Remote Access Controller
configuration and save it as an Integrated Dell Remote Access Controller
configuration profile, then apply to a collection as part of the workflow while
deploying an operating system.
You can create or edit Integrated Dell Remote Access Controller profiles for a
system with the System Viewer Utility.
Creating an Integrated Dell Remote Access Controller Profile
To create an Integrated Dell Remote Access Controller profile:
1 On the System Viewer Utility, click iDRAC Configuration. The
Integrated Dell Remote Access Controller Configuration options are
displayed.
2 Select Create a New Profile and click Next .
The Integrated Dell Remote Access Controller configuration of the system
is retrieved and displayed.
3 Click the Network Configuration tab.
4 Select the attributes you want to configure from the drop-down list. You
can configure the following attributes:
– LAN Settings
DLCI_UserGuide.book Page 75 Tuesday, November 22, 2011 5:00 PM