Owner's Manual

Using the System Viewer Utility 71

Using the System Viewer Utility

This chapter describes the operations that you can perform with the System

Viewer Utility.

You can use the System Viewer Utility to:

• View and edit the hardware configuration. For more information, see

Viewing and Editing Hardware Configuration.

• View and edit the RAID configuration. For more information, see Viewing

and Configuring RAID.

• Create and edit Integrated Dell Remote Access Controller configuration

profiles for your system. For more information, see

Configuring Integrated

Dell Remote Access Controller Profiles for a System.

• Create configurations for network adapters such as NICs and CNAs and

save them to a profile. For more information, see

Configuring NICs and

CNAs for a System.

• View the current firmware inventory, compare it against a baseline, and

update the firmware. For more information, see

Comparing and Updating

Firmware Inventory.

• Compare the hardware configuration profiles. For more information, see

Comparing Hardware Configuration Profile.

• View and export the Lifecycle Controller logs. For more information, see

Viewing Lifecycle Controller Logs.

• View the hardware inventory for the system. For more information, see

Viewing the Hardware Inventory for the System.

NOTE: You can only edit the hardware configuration and RAID configuration

profiles directly, and not edit the system configurations directly.

• Perform tasks with respect to restoring a platform that includes:

– Exporting the system profile to an external location.

– Importing the saved system profile from an external location.

– Configuring Part Replacement properties for the system.

For more information, see Platform Restore for a System.

DLCI_UserGuide.book Page 71 Tuesday, November 22, 2011 5:00 PM