Owner's Manual

Using the Configuration Utility 65
– Targ et A dap te r — the type of adapter present on the target system. A
target system can have multiple adapters.
– Configuration Applied — the configuration that got applied to the
target system.
5 Select any record on the comparison report and click View Details to view
the
Port Comparison details. The details of the ports on the system are
displayed. The color coding is similar to the
Comparison Report screen.
See
step 4.
6 Select the port and click View Details to view the Personality Comparison
details. The following details are displayed:
– Partition — the partition number on the port.
– Personality — the personality that the target system originally had on
that partition.
– Personality Applied — the personality that was applied from the
NIC/CNA profile to that partition.
– Min. Bandwidth — the minimum bandwidth that the partition
originally had.
– Min. Bandwidth Applied — the minimum bandwidth that was
applied to the partition.
– Max. Bandwidth — the maximum bandwidth that the partition
originally had.
– Max. Bandwidth Applied — the maximum bandwidth that was
applied to the partition.
The color coding is similar to the Comparison Report screen. See step 4
for details.
7 Select any of the partitions and click View Port Details . The Port Details
screen displays NIC and iSCSI attribute details. The following details are
displayed:
– Attribute — the list of NIC or iSCSI attributes.
– System Value — the attribute value that was originally present on the
system.
– Val ue A p pl i ed — the attribute value that was applied from the profile.
DLCI_UserGuide.book Page 65 Tuesday, November 22, 2011 5:00 PM