Owner's Manual

Using Dell Lifecycle Controller Integration 37
• Change administrative credentials. For more information, see Changing
the Administrative Credentials Used by Dell Lifecycle Controller
Integration for ConfigMgr.
You can also use the GUI to configure the security. For more information, see
Using the Graphical User Interface .
Validating a Dell Factory-Issued Client Certificate on the Integrated Dell Remote
Access Controller for Auto-Discovery
This security option requires that a system being discovered by the
provisioning website during the discovery and handshake process has a valid
factory-issued client certificate which is deployed to the Integrated Dell
Remote Access Controller. This feature is enabled by default. To disable the
feature, run the following command:
[Program Files]\Dell\DPS\Bin\import.exe
–CheckCertificate false
NOTE: By default, the CheckCertificate value is set to true. Ensure that you set the
CheckCertificate value to false if you are not using unique certificates.
Pre-authorizing Systems for Auto-Discovery
This security option checks the service tag of the system being discovered
against a list of authorized service tags you have imported. To import the
authorized service tags, create a file containing a comma-separated list of
service tags, and import the file by running the following command:
[Program Files]\Dell\DPS\Bin\import.exe -add
[file_with_comma_delimited_service_tags].
Running the command creates a record for each service tag in the repository
file [Program Files]\Dell\DPS\Bin\Repository.xml.
This feature is disabled by default. To enable this authorization check, run
the following command:
[Program Files]\Dell\DPS\bin\import.exe
–CheckAuthorization false.
DLCI_UserGuide.book Page 37 Tuesday, November 22, 2011 5:00 PM