Owner's Manual

18 Use Case Scenarios
Deploying Operating System on Collection
You can use Dell Lifecycle Controller Integration for ConfigMgr to deploy an
operating system on a collection of systems under the All Dell Lifecycle
Controller Servers on the ConfigMgr console.
Prerequisites
• Common Prerequisites.
• Install Dell Server Deployment Pack version 1.2, available as an additional
plugin and then create a task sequence using Dell Server Deployment Pack
to apply drivers from Lifecycle Controller. For more information, see
Applying Drivers From Lifecycle Controller.
• Apply drivers from a ConfigMgr repository, for more information, see Dell
Server Deployment Pack documentation available at
support.dell.com/manuals .
• Create a task sequence boot media for the collection of systems with an
Integrated Dell Remote Access Controller to boot to the task sequence
ISO. For more information, see
Creating a Task Sequence Media (Bootable
ISO).
Workflow
1 From the ConfigMgr console, under Computer Management 
Collections , right-click on Managed Dell Lifecycle Controllers (OS
Unknown)
and select Dell Lifecycle Controller Launch Config Utility .
2 On the Dell Lifecycle Controller Configuration Utility , select Deploy
Operating System
.
3 Update the firmware from a Dell repository. For more information, see
Updating Firmware During OS Deployment.
4 Configure or edit the BIOS/NIC profiles. For more information, see
Configuring Hardware During OS Deployment.
5 Configure or edit the RAID profiles. For more information, see
Configuring RAID.
6 Apply NIC/CNA profiles to the collection. For more information, see
Applying a NIC or CNA Profile on a Collection.
DLCI_UserGuide.book Page 18 Tuesday, November 22, 2011 5:00 PM