Owner's Manual

42 Using Dell Lifecycle Controller Integration (DLCI)
5 Specify the folder/path to save the Dell Lifecycle Controller boot media.
NOTE: It is recommended to save the boot media to the local drive, and if
required copy it to a network location.
6 Click Create .
Setting a Default Share Location for the Lifecycle Controller Boot Media
To set a default share location for the Lifecycle Controller boot media:
1
From the ConfigMgr console, select System Center Configuration
Manager
 Site Database  Site Management  < site server name > 
Site Settings  Component Configuration .
2 In the Component Configuration window, right-click Out of Band
Management
and select Properties . The Out of Band Management
Properties
window appears.
3 Click the Dell Lifecycle Controller tab.
4 Under Default Share Location for Custom Lifecycle Controller Boot
Media
, click Modify to modify the default share location of the custom
Lifecycle Controller boot media.
5 In the Modify Share Information window, enter a new share name and
share path. Click
OK .
Deploying the Operating System
Remote operating system deployment is the ability to execute an unattended
installation of a target operating system on any auto-discovered system using
iDRAC.
This feature:
• Updates the firmware from a Dell repository.
• Makes changes to the hardware configuration.
• Makes changes to the RAID configuration.
• Enables you to select the advertisement and the operating system to be
deployed.
• Enables you to select the bootable media to deploy the operating system.
DLCI_UserGuide.book Page 42 Wednesday, February 2, 2011 10:49 AM