Owner's Manual

Setting Up Dell Lifecycle Controller Integration (DLCI) 23
Upgrading DLCI for ConfigMgr from a Previous
Version
NOTE: DLCI for ConfigMgr supports upgrading from version 1.1 to version 1.2 only.
To upgrade from version 1.0 to 1.2, you must first uninstall version 1.0 and then
install version 1.2. When you uninstall version 1.0, the previous settings are not
retained and you must re-discover the target systems after you install version 1.2.
Pre-requisites for Upgrading
Before you upgrade to DLCI for ConfigMgr version 1.2, you must upgrade
the firmware on the target systems in the following sequence:
1
Upgrade the BIOS of the target systems to the latest version.
2 Upgrade Lifecycle Controller on the target systems to version 1.4 or later.
For more information, see the
Dell Lifecycle Controller USC/USC-LCE
Version 1.4 User’s Guide
available on the support.dell.com/manuals .
3 Upgrade iDRAC on the target systems to version 1.5 or later for monolithic
systems and version 3.02 or later for modular systems. For more
information, see the
Integrated Dell Remote Access Controller 6 (iDRAC6)
Version 1.5 User Guide
, and the Integrated Dell Remote Access Controller 6
(iDRAC6) Enterprise for Blade Servers Version 3.0 User Guide
available at
support.dell.com/manuals .
Upgrading to DLCI for ConfigMgr Version 1.2
When you upgrade to DLCI for ConfigMgr version 1.2, the installer prompts
you to upgrade the firmware on the target systems to the latest versions
before you proceed with the upgrade. You may continue with the upgrade
process and update the firmware on the target systems later.
If you update the firmware of the discovered target systems after completing
the upgrade process, you must update the firmware information on the target
systems in the ConfigMgr database. For more information, see
Using
Import.exe to Update Target System Information
.
DLCI_UserGuide.book Page 23 Wednesday, February 2, 2011 10:49 AM