Owner's Manual

Setup and Use 33
certstorename=MY certhash=
fbcc14993919d2cdd64cfed68579112c91c05027
sslctlstorename=CA sslctlidentifier=
"ProvisioningCTL"
9
Use the following steps to enforce SSL and client certificates for the
website:
a Add a SSL binding to set the port to 4433 and to use the
DellProvisioningServer certificate. A warning displays that the
certificate is assigned to another program.
b Click OK .
c Remove the HTTP binding for port 4431.
d Select the required SSL option.
e Select the required client certificates option.
10 Click Apply .
Dell Auto-Discovery Network Setup Specification
For information on auto-discovery error messages, descriptions, and response
actions, see the Dell Auto-Discovery Network Setup Specification document at
www.delltechcenter.com.
Upgrade/Repair Issues
Use the following steps if you have upgraded or repaired the Dell Server
Deployment Pack after installing DLCI for ConfigMgr 1.1:
1
Copy the CustomReboot.vbs from
[ConfigMgrRoot]\AdminUI\XmlStorage\Extensions\Bin\Deployment\
Dell\PowerEdge\LC\
to
[ConfigMgrRoot]\OSD\Lib\Packages\Deployment\Dell\PowerEdge\
CustomReboot\
Override the file in the destination folder.
2 Copy the DellPowerEdgeDeployment.xml from
[ConfigMgrRoot]\AdminUI\XmlStorage\Extensions\Bin\Deployment\
Dell\PowerEdge\LC\
to
[ConfigMgrRoot]\AdminUI\XmlStorage\Extensions\Bin\Deployment\
Dell\PowerEdge\
Override the file in the destination folder.
DLCI_UserGuide.book Page 33 Thursday, April 22, 2010 10:48 AM