Owner's Manual

22 Setup and Use

Remove the HTTP binding for port 4431.

Select the required SSL option.

Select the required client certificates option.

Click

Apply

Dell Auto-Discovery Network Setup Specification

For information on auto-discovery error messages, descriptions, and response

actions, see the Dell Auto-Discovery Network Setup Specification document at

www.delltechcenter.com.

Repeated Reboots of Systems Configured in Shared Network Mode

While deploying an operating system on a system with iDRAC configured in

a shared network mode, the Windows PE environment startup may fail on

the network drivers, causing the system to restart before reaching the task

sequence. This is because the network does not assign IP addresses fast

enough. To avoid this issue, ensure that you enable Spanning Tree and Fast

Link on the network switch.

LC_SCCM.book Page 22 Friday, October 30, 2009 11:47 AM