Owner's Manual

16 Setup and Use
8 Click Reboot Targeted Collection .The console sends out a WS-MAN
command to all the systems with
iDRAC in the collection to boot from
the specified Lifecycle Controller boot media.
Once a system with iDRAC receives the WS-MAN command, it reboots to
Windows PE and runs the advertised task sequence. It then automatically
boots to the Lifecycle Controller boot media, depending on the boot order
you created in the task sequence. Once the deployment is successful, the
system with iDRAC moves to the Managed Dell Lifecycle Controller (OS
Deployed) collection under Computer Management→ Collections→ All
Dell Lifecycle Controller Servers.
Additional Features
Adding a Condition for a Fallback Step
Insert the following condition if you have configured Apply Driver Package,
or Auto Apply Drivers, or both the steps:
1
From the left-hand side of the ConfigMgr console, select Computer
Management
→ Operating System Deployment → Task Sequence .
2 Right-click on the task sequence and click Edit .
3 The Task Sequence Editor displays. Select Apply Driver Package .
4 Click the Options tab.
5 Click Add Condition → Task Sequence Variable .
6 Enter the variable name as DriversAppliedFromLC and select the
condition as
Exists .
7 Click OK .
You have added a condition for a fallback step.
Setting a Default Share Location for the Lifecycle Controller Boot Media
Use the following steps to set a default share location for the Lifecycle
Controller boot media:
1
From the left pane of the ConfigMgr console, select Site Management →
< site server name > → Site Settings → Component Configuration .
LC_SCCM.book Page 16 Friday, October 30, 2009 11:47 AM