Owner's Manual

14 Setup and Use
NOTE: It is recommended that you set the task sequence advertisement to
mandatory.
12 Create a Lifecycle Controller Boot Media. For more information, see the
"Creating a Lifecycle Controller Boot Media" section.
Applying Drivers from the ConfigMgr Repository
Use the following steps to apply drivers from the ConfigMgr repository:
1
Add a Set Boot Order step manually before each of the Reboot to PXE /
USB
steps. The Set Boot Order step instructs the systems to boot to a
virtual CD on the next boot.
Use the following steps to add a
Set Boot Order step manually:
a Right-click on the task sequence and select Add → Dell
Deployment
→ Create Dell PowerEdge Server Deployment
Template
.
b Select Boot Order from the Configuration Action Type drop-down
list.
c Select Set from the Action drop-down list.
d A new drop-down list for Configuration file / Command line
parameters
displays. Select —nextboot=virtualcd.slot.1 .
e Select Apply . The name of the step will change to Set Boot Order .
f Select and drag the Set Boot Order step to just before the Reboot to
PXE / USB
step.
g Repeat this process to create a Set Boot Order step before each
Reboot to PXE / USB step.
h Click OK to close the task sequence.
2 Apply driver packages for the selected operating systems in ConfigMgr.
For more information on applying driver packages, see
Dell Server
Deployment Pack for Microsoft System Center Configuration Manager
User’s Guide
on the Dell Support website at support.dell.com/manuals .
Deploying Operating System Remotely
Use the following steps to deploy an operating system to the collection
remotely:
LC_SCCM.book Page 14 Friday, October 30, 2009 11:47 AM