Owner's Manual

Issue 6
Description
After you successfully update the firmware of a CPLD on a modular server, and then perform a firmware
update operation of a component that requires a system restart (such as BIOS), the server is
automatically and repeatedly restarted.
Resolution
Perform a Power Cycle operation on the server.
Versions/Systems Affected
Lifecycle Controller 2 version 1.4.2
Issue 7
Description
After part replacement of NPAR-enabled card with NPAR disabled card or NPAR-disabled card with
NPAR-enabled card, the hardware inventory may show the stall data.
Resolution
Rerun CSIOR by performing a Power Cycle operation on the server.
Versions/Systems Affected
Lifecycle Controller 2 version 1.4.2
Issue 8
Description
The slot information of second port of the Fiber channel card may display an unknown value.
Resolution
Refer to the first port slot information.
Versions/Systems Affected
Lifecycle Controller 2 version 1.4.2
Issue 9
Description
The expander firmware cannot be updated using Lifecycle Controller 2.
Resolution
Install the firmware using operating system.
Versions/Systems Affected
Lifecycle Controller 2 version 1.4.2