Users Guide

* QLogic FC8 Embedded Mezz Card QME2572

* Emulex LPe16000 Single Port FC16 HBA

* Emulex LPe16000 Single Port FC16 HBA (LP)

* Emulex LPe16002 Dual Port FC16 HBA

* Emulex LPe16002 Dual Port FC16 HBA (LP)

* Emulex LPm16002 Dual Port FC16 HBA Mezzanine

RAID

• H310 Adapter

• H310 Mini Monolithic

• H310 Mini Blades

• H310 Embedded

• H710 Adapter

• H710 Mini Blades

• H710 Mini Monolithic

• H710P Adapter

• H710P Mini Blades

• H710P Mini Monolithic

• H810 Adapter

• H730P PERC9 Adapter

• PCIe Adapter

• PCIe Backplane

Integrated Broadcom NICs are controlled by both BIOS and the settings stored on the device itself. As a result, the Boot Protocol

eld in the HII of integrated NICs has no eect; this setting is instead controlled by the BIOS on the Integrated Devices screen. To

set integrated NICs to an iSCSI or PXE boot mode, select System BIOS Settings, and then select Integrated Devices. In the list for

each embedded NIC, select the appropriate value— Enabled for no boot capability, Enabled with PXE to use the NIC for PXE boot,

or Enabled with iSCSI to use the NIC to boot from an iSCSI target.

Modifying Device Settings

To modify device settings by using the Advanced Hardware Conguration:

NOTE: You can also modify the device settings by using the System Setup utility during startup. For more information

about the System Setup utility, see the Using The System Setup Program And Boot Manager chapter in this User's

Guide.

1. In the left pane, select System Setup.

2. In the right pane, click Advanced Hardware Conguration.

3. Select the device you want to congure.

On the basis of conguration setting changes, the following message may be displayed:

One or more of the settings requires a reboot to be saved and activated. Do you want to

reboot now?

4. Select No to continue making additional conguration changes.

All changes are applied during the next system restart.

Collect System Inventory on Restart

When you enable the Collect System Inventory On Restart property, hardware inventory and part conguration information is

discovered and compared with previous system inventory information on every system restart.