User's Manual

Component Firmware Configuration Security Information*

Backplane NA NA NA

CPLD NA NA NA

Power Supply Yes NA NA

FC HBA Yes Yes NA

Enclosure NA NA NA

PCIe SSD Yes NA NA

* The security information refers to the user credentials that are used to access the components.

Backup Server Profile

Use this licensed feature to do the following and store the backup image files in a vFlash SD card:

• Back up the following:

– Hardware and firmware inventory such as BIOS, NDCs, Lifecycle Controller supported add-in NIC

cards, and Storage Controllers (RAID level, virtual disk, and controller attributes)

– System information

– Lifecycle Controller firmware images, data and configuration, and iDRAC firmware and

configuration.

• Optionally, secure the backup image file with a passphrase.

Related Links

System or Feature Behavior During Backup

Back Up Server Profile

Before you back up the server profile, make sure that the following prerequisites are met:

• A software license for 12th generation Dell PowerEdge servers. For more information about managing

licenses using iDRAC Web interface, go to

Overview → Server → Licenses, and see the iDRAC Online

Help.

• The server has a valid service tag (7 characters).

• vFlash SD card is installed, initialized, and enabled.

• vFlash SD card has a minimum free space of 384 MB.

To back up the server profile:

1. In the left pane, select Platform Restore.

2. In the right pane, select Backup Server Profile.

3. To generate the backup file without entering the passphrase, click Finish.

Alternatively, to generate an encrypted backup file using a passphrase, enter the passphrase and click

Finish. In the absence of a passphrase, Lifecycle Controller encrypts the backup image file with a

default passphrase (internally-generated).