User's Manual

4. Select the related controller and click Finish.

NOTE: Break Mirror feature does not support software RAID controllers.

NOTE: For more information about the Break-mirror feature, see the Performing a Break-Mirror

Operation Using white paper available at delltechcenter.com/lc.

The system automatically turns off even if one mirrored array is successfully delinked.

System Setup-Advanced Hardware Configuration

Lifecycle Controller Advanced Hardware Configuration wizards allow you to configure BIOS, iDRAC, and

certain devices such as NIC, and RAID controllers through Human Interface Infrastructure (HII). HII is a

UEFI-standard method for viewing and setting a device's configuration. You can utilize a single utility to

configure multiple devices that may have different pre-boot configuration utilities. The utilities also

provide localized versions of devices such as the BIOS setup.

On the basis of system configuration, other device types may also appear under Advanced Hardware

Configuration if they support the HII configuration standard.

The Advanced Hardware Configuration wizard allows you to configure the following:

NOTE: You can also use System Setup utility during startup to configure the following devices. For

more information about the System Setup utility, see the Using The System Setup Program And

Boot Manager in this User's Guide.

• System BIOS Settings

• iDRAC Device Settings

• NICs

NOTE: You can configure only one NIC at a time.

– Broadcom 57810S DP 10G SFP+ ADAPTER (Full Height)

– Broadcom 57810S DP 10G SFP+ ADAPTER (Low Profile)

– Broadcom 57800S DP 10G BASE-T ADAPTER (Full Height)

– Broadcom 57800S DP 10G BASE-T ADAPTER (Low Profile)

– Broadcom 5720 DP 1G ADAPTER (Full Height)

– Broadcom 5720 DP 1G ADAPTER (Low Profile)

– Broadcom 5719 QP 1G ADAPTER (Full Height)

– Broadcom 5719 QP 1G ADAPTER (Low Profile)

– Broadcom 57800S QP rNDC (10G BASE-T + 1G BASE-T)

– Broadcom 57800S QP rNDC (10G SFP+ + 1G BASE-T)

– Broadcom 5720 QP rNDC 1G BASE-T

– Broadcom 57810S DP bNDC KR

– Broadcom 5719 QP 1G Mezz

– Broadcom 57810S DP 10G KR Mezz

– Intel i540 DP 10G BASE-T ADAPTER (Full Height)

– Intel i540 DP 10G BASE-T ADAPTER (Low Profile)

– Intel DP 10GBASE SFP+ (Full Height)

– Intel DP 10GBASE SFP+ (Low Profile)

– Intel i350 DP 1G ADAPTER (Full Height)