White Paper

18 Automatic Backup Server Profile | Revision 1.0.
5 Clearing Automatic Backup Server Profile Schedule
The automatic scheduling of the backup server profile operation can be disabled and the settings are
cleared.
5.1 Using RACADM
5.2 Using WS–Man
The ClearBackupSchedule() method used by the DCIM_LCService class is used to configure automatic
backup schedule using WS–MAN. The profile for the LC Management Profile contains additional
information about this method. The LC Best Practices Guide provides more information about scripting
this command.
5.3 Using iDRAC GUI
1. Log in to the iDRAC Web GUI by typing the IP address or hostname of the iDRAC in a address bar, and then
entering the appropriate information. You must have the ‘login’ and ‘server control’ privileges.
2. In the left pane, click iDRAC Settings  Server Profile. Click the Automatic Backup tab. Click Clear Settings.
The existing settings, if any, are cleared and the Automatic Backup Feature is disabled.
racadm systemconfig clearbackupscheduler
winrm i ClearBackupSchedule http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_LCService?SystemCreationClassName=DCIM_ComputerSystem+Cr
eationClassName=DCIM_LCService+SystemName=DCIM:ComputerSystem+Name=DCIM:LCSer
vice -u:<USER> -p:<PASS> -r:https://<IPADDRESS>/wsman -SkipCNCheck -SkipCACheck -
encoding:utf-8 -a:basic