Web Services Interface Guide

212 Dell Lifecycle Controller Web Services Interface Guide for Windows
PrimaryStatus = 1
ProductName = PERC H310 Adapter
RollupStatus = 1
SASAddress = 5782BCB00C577600
SecurityStatus = 0
SlicedVDCapability = 1
16.8 Getting a RAID ControllerView Instance
The get() command can be invoked using a particular instanceID, attained from listing the inventory.
Get a RAID ControllerView instance with the following parameters and syntax:
[INSTANCEID]: This is obtained from the enumeration in Section 16.7, in which this example would use
RAID.Slot.1-1 as an instanceID
EXAMPLE:
winrm g http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_ControllerView ?InstanceID=[INSTANCEID]
-r:https://[IPADDRESS]:443/wsman -u:[USER] -p:[PASSWORD]
-auth:basic -encoding:utf-8 -SkipCNCheck -SkipCACheck
OUTPUT:
DCIM_ControllerView
Bus = 1
CacheSizeInMB = 0
CachecadeCapability = 0
ControllerFirmwareVersion = 20.10.1-0066
Device = 0
DeviceCardDataBusWidth = 1
DeviceCardManufacturer = DELL
DeviceCardSlotLength = 4
DeviceCardSlotType = PCI Express x8