User's Manual

Comparing Firmware Versions

To compare the version of the update or rollback with the version currently installed on the system, compare the

versions in the Current and Available fields:

• Component — Displays the name of the components. Select the option corresponding to the component that you

want to update.

• Current — Displays the component version currently installed on the system.

• Available — Displays the version of the available firmware.

Updating or Rolling Back Devices That Affect Trusted Platform Module Settings

Enabling Trusted Platform Module (TPM) with pre-boot measurement enables the BitLocker protection on the system.

When BitLocker protection is enabled, updating or rolling back the components such as RAID controller, NIC, and BIOS

require that a recovery password is entered or a USB drive that contains a recovery key is inserted during the next

system restart. For information on how to set TPM settings, see the

BIOS User Guide

available at dell.com/support/

manuals.

When Lifecycle Controller detects that TPM security is set to On with Pre-boot Measurements, a message indicates that

certain updates require the recovery password or USB drive with the recovery key. The message also indicates

components that affect the BitLocker.

You can choose not to update or roll back those components by navigating to the Select Updates page, and then

clearing the options for the appropriate components.