Technical White Paper

[CIFS_or_NFS_Password]: This is the corresponding password to the username containing the
ISO image.
[OS.ISO]: This is to be replaced by the actual name of the ISO image.
EXAMPLE:
wsman invoke -a ConnectNetworkISOImage
http://schemas.dmtf.org/wbem/wscim/1/cimschema/
2/root/dcim/DCIM_OSDeploymentService
?CreationClassName=DCIM_OSDeploymentService,Name=DCIM:OSDeploymentService,Sys
temCreationClassName=DCIM_ComputerSystem,
SystemName=DCIM:ComputerSystem
-h $IPADDRESS -V –v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD
-k IPAddress="[CIFS_or_NFS_IPaddress]" -k ShareName="/[CIFS_or_NFS]"
-k ShareType="[2_or_0]" -k Username="[CIFS_or_NFS_Username]"
-k Password="[CIFS_or_NFS_Password]" -k Workgroup="WORKGROUP"
–k ImageName="[OS.ISO]" -j utf-8 -y basic
OUTPUT:
Returns 0 for success or 1 if an error occurred in starting the processing of input parameters. The
MessageID and Message output parameters will further contain method invocation information if
an error occurred.
<n1:ConnectNetworkISOImage_OUTPUT>
<n1:Job>
<wsa:Address>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anon
ymous</wsa:Address>
<wsa:ReferenceParameters>
<wsman:ResourceURI>http://schemas.dell.com/wbem/wscim/1/cimschema/
2/DCIM_OSDConcreteJob</wsman:ResourceURI>
<wsman:SelectorSet>
<wsman:Selector
Name="InstanceID">DCIM_OSDConcreteJob:1</wsman:Selector>
<wsman:Selector Name="__cimnamespace">root/dcim</wsman:Selector>
</wsman:SelectorSet>
</wsa:ReferenceParameters>
</n1:Job>
<n1:ReturnValue>4096</n1:ReturnValue>
</n1:ConnectNetworkISOImage_OUTPUT>
11.3.15 Disconnect Network ISO Image
This method can be used to disconnect the target system from a bootable ISO image located on a
CIFS or an NFS share.
Invoke DisconnectNetworkISOImage() with the following syntax:
EXAMPLE:
wsman invoke -a DisconnectNetworkISOImage
http://schemas.dmtf.org/wbem/wscim/1/cimschema/
2/root/dcim/DCIM_OSDeploymentService
?CreationClassName=DCIM_OSDeploymentService,
Name=DCIM:OSDeploymentService,