Technical White Paper

</s:Detail>
</s:Fault>
11.3.7 Detach Network ISO USB Device
This method is used to detach the emulated USB device that had been attached by calling the
earlier BootToNetworkISO() method.
Invoke DetachISOImage() with the following syntax:
EXAMPLE:
wsman invoke -a DetachDrivers http://schemas.dmtf.org/wbem/wscim/1/cimschema/
2/root/dcim/DCIM_OSDeploymentService
?CreationClassName=DCIM_OSDeploymentService,
Name=DCIM:OSDeploymentService,
SystemCreationClassName=DCIM_ComputerSystem,
SystemName=DCIM:ComputerSystem
-h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD -j utf-8 -y basic
OUTPUT:
Returns 0 for success or an integer for error or job in execution. An error such as the following can
occur if an ISO image is not attached.
<n1:DetachDrivers_OUTPUT>
<n1:Message>Unable to retrieve Lifecycle Controller handle
</n1:Message>
<n1:MessageID>OSD7</n1:MessageID>
<n1:ReturnValue>2</n1:ReturnValue>
</n1:DetachDrivers_OUTPUT>
11.3.8 Boot To PXE
The BootToPXE() method is used to boot to server using the PXE mechanism, which is to reboot
the host server and boot to PXE.
Invoke to boot target system to PXE with the following syntax:
EXAMPLE:
wsman invoke -a BootToPXE http://schemas.dmtf.org/wbem/wscim/1/cimschema/
2/root/dcim/DCIM_OSDeploymentService
?CreationClassName=DCIM_OSDeploymentService,
Name=DCIM:OSDeploymentService,
SystemCreationClassName=DCIM_ComputerSystem,
SystemName=DCIM:ComputerSystem
-h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD -j utf-8 -y basic
Returns 0 for success or 1 if an error occurred in starting the processing of input parameters. The
MessageID and Message output parameters will further contain method invocation information if
an error occurred.
OUTPUT:
<n1:BootToPXE_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>