Technical White Paper

http://www.dmtf.org/sites/default/files/standards/documents/DSP1039_1.0.0.pdf
Replace “DCIM User 16” with the applicable user name and “2” with the desired request state.
Invoke RequestStateChange() with the following parameters and syntax:
EXAMPLE:
wsman invoke -a RequestStateChange
"http://schemas.dmtf.org/wbem/wscim/1/cimschema/2/DCIM_MFAAccount
?__cimnamespace=root/dcim,SystemCreationClassName=DCIM_SPComputerSyste,Creati
onClassName=
DCIM_MFAAccount,SystemName=systemmc,
Name=DCIM User 16"
-h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD
-k RequestedState=2
-j utf-8 -y basic
OUTPUT:
<n1:RequestStateChange_OUTPUT>
<n1:Job xsi:nil="true"/>
<n1:ReturnValue>0</n1:ReturnValue>
</n1:RequestStateChange_OUTPUT>
Response status other than zero indicates an error has occurred and a message may be displayed.
5.5.4 Modify User Privilege (using DMTF Model)
When the account setting capability allows, the user account privileges may be modified by running
a set() operation on the ActivityQualifiers property of the CIM_Privilege class instance associated
with the CIM_Account class instance. The set() operation requires an instance reference. The
instance reference may be retrieved by adding EnumerateEPR mode to enumerate or get of the
class.
The profile defines this property as string array containing all the privileges to be allowed for the
account. Setting the list of privileges is a complete over-write of the earlier setting. This restriction is a
limitation where the protocol does not define how to set a particular index in the list. The new list will
replace the earlier list in its entirety.
Profiles:
http://www.dmtf.org/sites/default/files/standards/documents/DSP1034_1.0.1.pdf
http://www.dmtf.org/sites/default/files/standards/documents/DSP1039_1.0.0.pf
Here is an example list of available privileges from an instance of the class
CIM_RoleBasedManagementCapabilities:
DCIM_LocalRoleBasedManagementCapabilities
ActivitiesSupported = 7, 7, 7, 7, 7, 7, 7, 7, 7
ActivityQualifiersSupported = Login to DRAC, Configure DRAC, Configure
Users, Clear Logs, Execute Server Control Commands, Access Console
Redirection, Access Virtual Media, Test Alerts, Execute Di agnostic
Commands
ElementName = Local Role Based Management Capabilities
InstanceID = DCIM:LocalRoleBasedManagementCapabilities