Technical White Paper
<n1:PossibleValues>SAS</n1:PossibleValues>
<n1:PossibleValues>SATA</n1:PossibleValues>
</n1:DCIM_RAIDEnumeration>
<n1:DCIM_RAIDEnumeration>
<n1:AttributeName>
RAIDloadBalancedMode
</n1:AttributeName>
<n1:CurrentValue>Disabled</n1:CurrentValue>
<n1:FQDD>RAID.Integrated.1-1</n1:FQDD>
<n1:InstanceID>RAID.Integrated.1-1:RAIDloadBalancedMode
</n1:InstanceID>
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:PendingValue/>
<n1:PossibleValues>Automatic</n1:PossibleValues>
<n1:PossibleValues>Disabled</n1:PossibleValues>
</n1:DCIM_RAIDEnumeration>
<n1:DCIM_RAIDEnumeration>
<n1:AttributeName>
RAIDBatteryLearnMode
</n1:AttributeName>
<n1:CurrentValue>
Warn only
</n1:CurrentValue>
<n1:FQDD>RAID.Integrated.1-1</n1:FQDD>
<n1:InstanceID>RAID.Integrated.1-1:RAIDBatteryLearnMode
</n1:InstanceID>
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:PendingValue/>
<n1:PossibleValues>Automatic</n1:PossibleValues>
<n1:PossibleValues>Warn only</n1:PossibleValues>
<n1:PossibleValues>Disabled</n1:PossibleValues>
</n1:DCIM_RAIDEnumeration>
<n1:DCIM_RAIDEnumeration>
<n1:AttributeName>
RAIDdefaultWritePolicy
</n1:AttributeName>
<n1:CurrentValue>
WriteBack</n1:CurrentValue>
<n1:FQDD>
Disk.Virtual.1:RAID.Integrated.1-1
</n1:FQDD>
<n1:InstanceID>Disk.Virtual.1:RAID.Integrated.1-
1:RAIDdefaultWritePolicy</n1:InstanceID>
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:PendingValue/>
<n1:PossibleValues>WriteThrough </n1:PossibleValues>
<n1:PossibleValues>WriteBack</n1:PossibleValues>
<n1:PossibleValues>WriteBackForce</n1:PossibleValues>
</n1:DCIM_RAIDEnumeration>
16.2 Getting a RAID Enumeration Instance
Use the following example to get an instance of the
DCIM_RAIDEnumeration
class instead of all
the instances as shown in Section 16.1.
Get a
RAIDEnumeration
instance with the following parameters and syntax:
[INSTANCEID]: This is obtained from the enumeration in Section 16.1, which shows an
example using RAID.Integrated.1-1:RAIDloadBalancedMode as an
instanceID
.
The ‘set attribute’ method in section
16.19.1 uses the
FQDD,
AttributeName,
and
PossibleValues
fields as input.
The ‘set attributes’ method in section
16.19.2 uses the FQDD,
AttributeName, and PossibleValues
fields as input.
The ‘get’ instance method in
section 16.2 uses this
InstanceID
as input.