Technical White Paper

Note: When a you do not want to set a reboot type while creating a target job, you
should comment out the RebootJobType in the input xml. You should not enter “0”
or give no parameter in the input XML.
ScheduledStartTime & UntilTime: See Section 3.2.4
EXAMPLE:
wsman invoke -a CreateTargetedConfigJob
http://schemas.dmtf.org/wbem/wscim/1/cimschema/
2/root/dcim/DCIM_NICService
?SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_NICServic
e,SystemNam
e=DCIM:ComputerSystem,
Name=DCIM:NICService
-h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD -J CreateTargetedConfigJob_NIC.xml -j utf-8 -y
basic
The input file CreateTargetedConfigJob_CNA.xml is shown below:
<p:CreateTargetedConfigJob_INPUT
xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_NICService">
<p:Target>NIC.Integrated.1-1-1</p:Target>
<p:RebootJobType>1</p:RebootJobType>
<p:ScheduledStartTime>TIME_NOW</p:ScheduledStartTime>
<p:UntilTime>20201111111111</p:UntilTime>
</p:CreateTargetedConfigJob_INPUT>
OUTPUT:
After running this method, a jobid or a message is displayed indicating an error. The status of this jobid
can be checked within the job control provider in Section 10.
CreateTargetedConfigJob_OUTPUT
Job
Address = http://schemas.xmlsoap.org/ws/2004/08/addressing/role
/anonymous
ReferenceParameters
ResourceURI = http://schemas.dell.com/wbem/wscim
/1/cim-schema/2/DCIM_LifecycleJob
SelectorSet
Selector: InstanceID = JID_001269609760, __cimnamespace = root/dcim
ReturnValue = 4096
15.8 Deleting the Pending Values for CNA-
DeletePendingConfiguration()
The DeletePendingConfiguration() method cancels the pending configuration changes made before
the configuration job is created using the CreateTargetedConfigJob() method. This method only
operates on the pending changes before running the CreateTargetedConfigJob() method. After the
configuration job is created, to cancel the pending changes, call the DeleteJobQueue() method in the
Job Control profile.
Invoke the DeletePendingConfiguration() method with the following parameters and syntax: