Setup guide

19 Configuring VLAN Settings in Lifecycle Controller for Dell PowerEdge Servers

A Supported Network Interface Cards For VLAN Settings

Using LC GUI

To configure VLAN Settings, on the Lifecycle Controller page, go to Settings  Network Settings for all

the Dell supported network cards such as Broadcom, Intel, Qlogic, and Mellanox.

Note: All FC cards are not supported for VLAN Settings in LC UI such as Brocade, Emulex, and Qlogic.

To know the cards are either Ethernet or FC, refer to the

Lifecycle Controller1.3 User’s Guide

available at

dell.com/support/manuals.

Sl.

Description Vendor

1 57810S DP 10G SFP+ ADAPTER (Full Height) Broadcom

2 57810S DP 10G SFP+ ADAPTER (Low Profile) Broadcom

3 57800S DP 10G BASE-T ADAPTER (Full Height) Broadcom

4 57800S DP 10G BASE-T ADAPTER (Low Profile) Broadcom

5 5720 DP 1G ADAPTER (Full Height) Broadcom

6 5720 DP 1G ADAPTER (Low Profile) Broadcom

7 5719 QP 1G ADAPTER (Full Height) Broadcom

8 5719 QP 1G ADAPTER (Low Profile) Broadcom

9 57800S QP rNDC (10G BASE-T + 1G BASE-T) Broadcom

10 57800S QP rNDC (10G SFP+ + 1G BASE-T) Broadcom

11 5720 QP rNDC 1G BASE-T Broadcom

12 57810S DP bNDC KR Broadcom

13 5719 QP 1G Mezz Broadcom

14 57810S DP 10G KR Mezz Broadcom