Release Notes

Limitation 2
Description
While updating iDRAC firmware using a tool other than Lifecycle Controller, Lifecycle Controller must
not be open or running, because it results in an unknown behavior. Use Lifecycle Controller after the
firmware is successfully updated.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0
Limitation 3
Description
If the iDRAC firmware update is interrupted for any reason, wait for 30 minutes before attempting
another firmware update.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0
Limitation 4
Description
Only Windows operating system can be deployed on systems with a software RAID controller.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0
Limitation 5
Description
Firmware update is supported only for LAN On Motherbaords, Network Daughter Cards, and network
adapters from Broadcom, QLogic, and Intel, and some of the Qlogic and Emulex fiber channel cards. For
the list of components that can be updated, see the
Lifecycle Controller 2 User's Guide , available at
dell.com/support/manuals.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0
Limitation 6
Description
After the CPLD firmware is updated on modular servers, on the View Current Versions page, under
Firmware update, the firmware update date is displayed as 2000-01-01, regardless of the actual update
date. The updated date and time is displayed on the basis of time zone that is configured on the server.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0