Release Notes

Issue 5
Description
If a Mellanox card is present in the system, then under Network Settings, the port number must be
displayed as Port 1 and Port 2, because it is a dual port. But, the port number is displayed as Port 1 for
both the ports or the port numbers are not displayed.
Resolution
To distinguish between the port numbers, see the MAC address or the Device Settings.
You can access Device Settings in the following methods:
- During POST, press <F2>, and then click System Setup.
- On the Lifecycle Controller Home page, click System Setup, and then click Advanced
Hardware Configuration.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0
Issue 6
Description
After you successfully update the firmware of a CPLD on a modular server, and then perform a firmware
update operation of a component that requires a system restart (such as BIOS), the server is
automatically and repeatedly restarted.
Resolution
Perform a Power Cycle operation on the server.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0
Limitations
Limitation 1
Description
The following characters are supported for 'User Name' and 'Password':
 Digits (0–9)
 Alphanumeric (a–z, A–Z)
 Hyphen (-)
Note: For 'Domain Name', a period (.) is allowed. For example, 'x123.com'.
Versions/Systems Affected
Lifecycle Controller 2 version 1.3.0