Practices Guide

Lifecycle Controller Integration―Best Practices Specification

ENUMERATE the DCIM_NICView class and note the PCID, then look up in PCID table

http://pciids.sourceforge.net/pci.ids

2) ENUMERATE the DCIM_NICString class and search for attribute ChipMdl. The

CurrentValue parameter will contain the NIC card model number.

DCIM_NICString

AttributeName = ChipMdl

CurrentValue = BCM5716 C0

DefaultValue

FQDD = NIC.Embedded.2-1

InstanceID = NIC.Embedded.2-1:ChipMdl

IsReadOnly = true

MaxLength = 0

MinLength = 0

PendingValue

3.5 List of Partitionable NIC Cards for LC2

The following is a list of partitionable NICs supported by LC2.

Broadcom

57810 bNDC – JVFVR

57810 SFP+ NIC – N20KJ

57810 Base-T NIC – W1GCR

57810 Mezz – 55GHP

57800 rNDC – MT09V

QLogic

QMD8262 bNDC – D90TX

QLE8262 NIC – JHD51

QME8262 Mezz – 9Y65N

3.6 iDRAC Telnet Attribute Enables SerialRedirection

The following behavior describes a situation where setting certain iDRAC attribute(s) causes another

iDRAC attribute to automatically and simultaneously change.

Setting any of the following Telnet attributes causes the SerialRedirection attribute to become

Enabled.

 Port [ InstanceID = iDRAC.Embedded.1#Telnet.1#Port ]

 Enable [ InstanceID = iDRAC.Embedded.1#Telnet.1#Enable ]

 Timeout [ InstanceID = iDRAC.Embedded.1#Telnet.1#Timeout ]