Practices Guide

Lifecycle Controller Integration―Best Practices Specification

143

B) ExportFactoryConfiguration(): Invokes the export operation [ReturnValue=4096]

NOTE: The user must set applicable IP address, username, password, filename, and

workgroup of the network share.

C) Poll jobstatus for Completed: GET the InstanceID of from D). See section 2.3 for a

definition of

GET.

32 OS Deployment Profile Use Cases

32.1 Discovery of OS Deployment Profile Support

Use the following procedure below to confirm the existence of OS Deployment profile support.

Applies to: LC1.3.0+

Prerequisites for script: none

Script: GetOSDProfile.win

A) The Lifecycle Controller remote service must be in a “ready” state before executing any

other WSMAN commands. The GetRSStatus() method or the GetRemoteServicesAPIStatus()

method may be used depending on the version of the LC Management registered profile.

B) GetLCRegisteredProfiles(): ENUMERATE the DCIM_LCRegisteredProfile class to view all

registered profiles. See section 2.2 for a definition of

ENUMERATE .

C) Search for “RegisteredName= OS Deployment” and note its instanceID to use in step D)

D) GetLCRegisteredProfile(): GET the DCIM_LCRegisteredProfile instance using the

InstanceID from C). See Section 2.3 for a definition of

GET.

Results for the InstanceID of DCIM:OSDeployment:1.1.0 shown below. If no instance is returned,

the profile is not supported.

DCIM_LCRegisteredProfile

AdvertiseTypeDescriptions = WS-Identify

AdvertiseTypeDescriptions = Interop Namespace

AdvertiseTypes = 1

InstanceID = DCIM:OSDeployment:1.1.0

OtherRegisteredOrganization = DCIM

ProfileRequireLicense = Remote Operating System Deployment

ProfileRequireLicenseStatus = LICENSED

RegisteredName = OS Deployment

RegisteredOrganization = 1

RegisteredVersion = 1.4.0