Practices Guide

Lifecycle Controller Integration―Best Practices Specification
122
InstanceID = DCIM:PhysicalAssetRegisteredProfile:1
OtherRegisteredOrganization
RegisteredName = Physical Asset
RegisteredOrganization = 2
RegisteredVersion = 1.0.0
24.3 List all CIM Profiles
Use the following procedure below to list all CIM profiles supported on a system.
Applies to: LC1.3.0+
Prerequisites for script: none
Script: GetCIMRegisteredProfiles.win
A) The Lifecycle Controller remote service must be in a “ready” state before executing any
other WSMAN commands. The GetRSStatus() method or the GetRemoteServicesAPIStatus()
method may be used depending on the version of the LC Management registered profile.
B) GetCIMRegisteredProfiles(): ENUMERATE the DCIM_RegisteredProfile class to view all
registered profiles. See section 2.2 for a definition of
ENUMERATE .
25 Video Profile Use Cases
25.1 Discovery of Video Profile Support
Use the following procedure below to confirm the existence of Video profile support.
Applies to: LC1.5.0+
Prerequisites for script: none
Script: GetVideoProfile.win
A) The Lifecycle Controller remote service must be in a “ready” state before executing any
other WSMAN commands. The GetRSStatus() method or the GetRemoteServicesAPIStatus()
method may be used depending on the version of the LC Management registered profile.
B) GetLCRegisteredProfiles(): ENUMERATE the DCIM_LCRegisteredProfile class to view all
registered profiles. See section 2.2 for a definition of
ENUMERATE .
C) Search for “RegisteredName=Video” and note its instanceID to use in step D)
D) GetLCRegisteredProfile(): GET the DCIM_LCRegisteredProfile instance using the
InstanceID from C). See Section 2.3 for a definition of
GET.