Owner's Manual

Limitation 11
Description
The ISCSI offload feature can be enabled only on two of the available four ports. If the ISCSI offload
attribute is enabled on a card, and is replaced by another card whose ISCSI offload mode is also enabled
on the other two ports, an error is thrown. The Firmware will not allow the attribute to be set, because it
is already set on the other two ports.
Versions/Systems Affected
Lifecycle Controller 2 version 1.1.5
Installation
Prerequisites
iDRAC7 version 1.40.40.
Installation Instructions
For information about installation, see the Lifecycle Controller 2 User’s Guide .