White Papers

LC Integration Best Practices Specification
123
This workflow enumerates DCIM_AssociatedPowerManagementService class.
Applies to: LC1.5.0
Prerequisites for script: none
Script: GetBladePower.win
A) The Lifecycle Controller remote service must be in a “ready” state before executing any
other WSMAN commands. The GetRSStatus() method or the GetRemoteServicesAPIStatus()
method may be used depending on the version of the LC Management registered profile.
B) GetAssociatedPowerManagementService(): ENUMERATE the
CIM_AssociatedPowerManagementService class. See section 2.2 for a definition of
ENUMERATE .
28 System Info Profile Use Cases
28.1 Discovery of System Info profile support
Use the following procedure below to confirm the existence of System Info profile support.
Applies to: LC1.5.0+
Prerequisites for script: none
Script: GetSystemInfoProfile.win
A) The Lifecycle Controller remote service must be in a “ready” state before executing any
other WSMAN commands. The GetRSStatus() method or the GetRemoteServicesAPIStatus()
method may be used depending on the version of the LC Management registered profile.
B) GetLCRegisteredProfiles(): ENUMERATE the DCIM_LCRegisteredProfile class to view all
registered profiles. See section 2.2 for a definition of ENUMERATE .
C) Search for “RegisteredName=System Info” and note its instanceID to use in step D)
D) GetLCRegisteredProfile(): GET the DCIM_LCRegisteredProfile instance using the
InstanceID from C). See Section 2.3 for a definition of GET.
Results for the InstanceID of DCIM:SystemInfo:1.0.0 shown below. If no instance is returned,
the profile is not supported.
DCIM_LCRegisteredProfile
AdvertiseTypeDescriptions = WS-Identify
AdvertiseTypeDescriptions = Interop Namespace
AdvertiseTypes = 1
AdvertiseTypes = 1
InstanceID = DCIM:SystemInfo:1.0.0