Users Guide

Error Message Resolution
RAID configuration failed Lifecycle Controller failed when creating the RAID configuration. To
resolve this issue:
1. Reboot the system.
2. Re-enter Lifecycle Controller by pressing the <F10> key.
3. Try again to create the RAID configuration.
Generic Failure Lifecycle Controller experienced an unidentified error when creating the
RAID configuration. To resolve this issue:
1. Reboot the system.
2. Re-enter Lifecycle Controller by pressing the <F10> key.
3. Try again to create the RAID configuration.
No physical disk was selected for this
virtual disk
The number of physical disks selected for the virtual disk is insufficient.
Review the minimum number of physical disks required for the current
RAID level, and select at least that number of physical disks.
No valid RAID level found The number of physical disks attached to the system is insufficient for the
RAID level selected. Attach more physical disks and try again.
An error occurred. One or more settings
may not be saved.
An error occurred when changing Hardware Advanced Configuration
settings. To resolve this issue:
1. Reboot the system.
2. Re-enter Lifecycle Controller by pressing the <F10> key.
3. Change the settings.
An error occurred. One or more settings
may not be restored.
An error occurred when restoring Hardware Advanced Configuration
settings. To resolve this issue:
1. Reboot the system.
2. Re-enter Lifecycle Controller by pressing the <F10> key.
3. Re-open the Advanced Configuration screen.
This feature is not supported in this
configuration. Please update your BIOS
and iDRAC7 Firmware to the latest version
and retry.
The blade server does not support the selected feature.
No Share Name/Details present Type the correct share name or username and password, and retry.
Cannot authenticate the login credentials
and share name.
Type the correct share name or username and password, and retry.
Invalid Catalog File Type the correct path to the catalog file, or the correct catalog name.
Cannot mount the network share This error may occur due to temporary network problems. If this issue
persists, check the network connection and then retry.
The operation completed successfully, but
the system cannot automatically shut
down. Shut the system down manually.
Press the power button on the system to shutdown manually.
Failed to copy to Network Share This error may occur due to temporary network problems. If this issue
persists, check the network connection and then retry.
Invalid USB Folder Location Provide the valid folder location.
Invalid Network Share Folder Location Provide the valid folder location.
63