Users Guide

Error Message Resolution
Drivers pack not found
OR
Error populating OS list
Lifecycle Controller cannot find the drivers required to install the
operating system. To resolve this issue, perform a platform update. See
Updating Platform for more information.
The repository you selected as an update
source failed an integrity check. Recreate
the repository, download it again, or
provide an alternate source to be used.
This error may be caused by temporary network problems. Try again later
to connect to the update repository. If you are using a local USB device
for your update repository and this problem persists, create the
repository again (see Configuring Local USB Flash Drive) or provide an
alternate repository.
Decompression of the catalog file failed The catalog downloaded to compare the currently installed versions with
the latest available versions cannot be decompressed. This error may be
caused by temporary network problems. Try again later to connect to the
update repository. If you are using a local USB device for your update
repository and this problem persists, create the repository again
(seeConfiguring Local USB Flash Drive) or provide an alternate
repository.
Unable to resolve host name This error is probably caused by one of the following:
• Invalid name is specified for the platform update FTP server. For
more information, see Selecting Type of Update And Update
Source.
• Invalid Domain Name Server (DNS) specified in the Network
Settings page. For more information, see Operating System
Deployment.
Update Package Corrupted Lifecycle Controller has detected that one or more of the DUPs used to
update the system is corrupted. If you are using a local USB device for
your update repository and this problem persists, create the repository
again (see Configuring Local USB Flash Drive) or provide an alternate
repository.
Enter a valid IPv6 Address for this iDRAC. Enter a valid IPv6 network address for iDRAC. See IPv6 Configuration. For
more information, see IPv6 Configuration.
Specify the IPv6 network address Prefix
length in the range of 1 to 128.
Enter the number of significant bits in the IPv6 address prefix for your
network. The prefix length should be between 1 and 128. For more
information, see IPv6 Configuration.
Enter the IPv6 Default Gateway address. Enter the IPv6 default gateway address. For more information, see IPv6
Configuration.
Enter a valid IPv6 DNS Server 1 Address. Enter a valid IPv6 DNS Server1 address. For more information, see IPv6
Configuration.
Enter a valid IPv6 DNS Server 2 Address. Enter a valid IPv6 DNS Server2 address. For more information, see IPv6
Configuration.
Enter a valid iDRAC Name of up to 63
characters.
Enter a valid iDRAC name that is less than or equal to 63 characters.
Enter a valid Domain Name of up to 64
characters.
Enter a valid domain name that is less than or equal to 64 characters.
Enter a valid Host Name of up to 62
characters.
Enter a valid host name that is less than or equal to 62 characters.
The VLAN ID in the range of 1 to 4094, as
defined by IEEE 801.1g specification.
Enter a VLAN ID between 1 and 4094. See Advanced LAN Configuration.
For more information, see Advanced LAN Configuration.
The VLAN ID Priority in the range of 0 to 7,
as defined by IEEE 801.1g specification.
Enter a VLAN ID priority value between 0 and 7. For more information, see
Advanced LAN Configuration.
62